IPE Beams: Sizes & Weights
European parallel-flange I-beams, IPE 80 through IPE 750, plus the lighter and heavier variants. 72 sizes from the European catalog, in kg/m with lb/ft alongside. Deeper reading: European Steel Sections Guide.
IPE series
| Designation | kg/m | lb/ft | Area (cm²) |
|---|---|---|---|
| IPE 80 | 6 | 4.03 | 7.6 |
| IPE 100 | 8.1 | 5.44 | 10.3 |
| IPE 120 | 10.4 | 6.99 | 13.2 |
| IPE 140 | 12.9 | 8.67 | 16.4 |
| IPE 160 | 15.8 | 10.62 | 20.1 |
| IPE 180 | 18.8 | 12.63 | 23.9 |
| IPE 200 | 22.4 | 15.05 | 28.5 |
| IPE 220 | 26.2 | 17.61 | 33.4 |
| IPE 240 | 30.7 | 20.63 | 39.1 |
| IPE 270 | 36.1 | 24.26 | 46 |
| IPE 300 | 42.2 | 28.36 | 53.8 |
| IPE 330 | 49.1 | 32.99 | 62.5 |
| IPE 360 | 57.1 | 38.37 | 72.7 |
| IPE 400 | 66.3 | 44.55 | 84.5 |
| IPE 450 | 77.6 | 52.14 | 98.9 |
| IPE 500 | 90.7 | 60.95 | 115.5 |
| IPE 550 | 106 | 71.23 | 135 |
| IPE 600 | 122 | 81.98 | 155.4 |
| IPE 750 x 134 | 134 | 90.04 | 170.7 |
| IPE 750 x 147 | 147 | 98.78 | 187.3 |
| IPE 750 x 173 | 173 | 116.25 | 220.4 |
| IPE 750 x 196 | 196 | 131.71 | 249.7 |
| IPE 750 x 220 | 220 | 147.83 | 280.3 |
IPE A series
| Designation | kg/m | lb/ft | Area (cm²) |
|---|---|---|---|
| IPE A 80 | 5 | 3.36 | 6.4 |
| IPE A 100 | 6.9 | 4.64 | 8.8 |
| IPE A 120 | 8.7 | 5.85 | 11.1 |
| IPE A 140 | 10.5 | 7.06 | 13.4 |
| IPE A 160 | 12.7 | 8.53 | 16.2 |
| IPE A 180 | 15.4 | 10.35 | 19.6 |
| IPE A 200 | 18.4 | 12.36 | 23.4 |
| IPE A 220 | 22.2 | 14.92 | 28.3 |
| IPE A 240 | 26.2 | 17.61 | 33.4 |
| IPE A 270 | 30.7 | 20.63 | 39.1 |
| IPE A 300 | 36.5 | 24.53 | 46.5 |
| IPE A 330 | 43 | 28.89 | 54.8 |
| IPE A 360 | 50.2 | 33.73 | 63.9 |
| IPE A 400 | 57.4 | 38.57 | 73.1 |
| IPE A 450 | 67.2 | 45.16 | 85.6 |
| IPE A 500 | 79.4 | 53.35 | 101.1 |
| IPE A 550 | 92.1 | 61.89 | 117.3 |
| IPE A 600 | 108 | 72.57 | 137.6 |
IPE AA series
| Designation | kg/m | lb/ft | Area (cm²) |
|---|---|---|---|
| IPE AA 80 | 4.9 | 3.29 | 6.2 |
| IPE AA 100 | 6.7 | 4.5 | 8.5 |
| IPE AA 120 | 8.4 | 5.64 | 10.7 |
| IPE AA 140 | 10.1 | 6.79 | 12.9 |
| IPE AA 160 | 12.3 | 8.27 | 15.7 |
| IPE AA 180 | 14.9 | 10.01 | 19 |
| IPE AA 200 | 18 | 12.1 | 22.9 |
| IPE AA 220 | 21.2 | 14.25 | 27 |
| IPE AA 240 | 24.9 | 16.73 | 31.7 |
| IPE AA 360 | 47 | 31.58 | 59.9 |
| IPE AA 400 | 53.4 | 35.88 | 68 |
| IPE AA 450 | 62.1 | 41.73 | 79.1 |
| IPE AA 500 | 73.2 | 49.19 | 93.2 |
| IPE AA 550 | 79.5 | 53.42 | 101.3 |
IPE O series
| Designation | kg/m | lb/ft | Area (cm²) |
|---|---|---|---|
| IPE O 180 | 21.3 | 14.31 | 27.1 |
| IPE O 200 | 25.1 | 16.87 | 32 |
| IPE O 220 | 29.4 | 19.76 | 37.5 |
| IPE O 240 | 34.3 | 23.05 | 43.7 |
| IPE O 270 | 42.3 | 28.42 | 53.9 |
| IPE O 300 | 49.3 | 33.13 | 62.8 |
| IPE O 330 | 57 | 38.3 | 72.6 |
| IPE O 360 | 66 | 44.35 | 84.1 |
| IPE O 400 | 75.7 | 50.87 | 96.4 |
| IPE O 450 | 92.4 | 62.09 | 117.7 |
| IPE O 500 | 107 | 71.9 | 136.3 |
| IPE O 550 | 123 | 82.65 | 156.7 |
| IPE O 600 | 154 | 103.48 | 196.2 |
IPE V series
Areas marked as computed on the individual size pages are derived from the tabulated weight and steel density rather than read from the section table.
Need counts, not just sizes?
Upload a drawing set and SteelFlo puts a box on every steel label it finds — every IPE beam on every page — ready to review and export as a bill of materials.
3 free takeoffsNo credit card requiredAISC + 5 international standards