25x25x3EA Dimensions & Weight
25x25x3EA is an equal-leg steel angle to AS/NZS 3679.1 with equal 25 mm legs and a 3 mm thickness, weighing 1.12 kg per metre (0.75 lb/ft) — a stock size for clip angles, connection material, and light bracing.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
or start a free takeoff to count 25x25x3EA on your drawing.
Free takeoff template in Excel. Takeoff template in Excel. Free with a Steelflo account.
25x25x3EA Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Leg 1 | 25 mm | 0.984 in |
| Leg 2 | 25 mm | 0.984 in |
| Thicknessnominal — AS/NZS names carry nominal thickness; rolled thickness can differ slightly | 3 mm | 0.118 in |
| Cross-section area (A)computed from weight and steel density | 1.4 cm² | 0.22 in² |
| Mass | 1.12 kg/m | 0.75 lb/ft |
Standard: AS/NZS 3679.1. Values from the published section tables; dimensions not listed here are not shown rather than estimated.
What does 25x25x3EA weigh and cost?
25x25x3EA has a mass of 1.12 kg per metre. At an example material price of 2.00 per kg (in your currency) that is about 2.24 per metre. Set your quantity, length, and price to total your own run:
Material only, example pricing (same currency as the price you enter). Actual steel pricing varies by region, grade, quantity, and market conditions — use your own supplier numbers for real bids.
Pricing more than one size? Build a full member list in the free calculator →
Tallying by hand?
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Stop counting 25x25x3EAs by hand.
Upload your drawing set and SteelFlo puts a box on each steel label it finds, including 25x25x3EA, ready to review and export as a bill of materials.
Related sizes
- 25x25x5EA1.65 kg/m
- 25x25x6EA2.08 kg/m
- 30x30x3EA1.35 kg/m
- 20x20x3EA0.87 kg/m
- 40x40x3EA1.83 kg/m
- 30x30x5EA2.01 kg/m
- 45x45x3EA2.06 kg/m
- 50x50x3EA2.31 kg/m
Comparing sizes? Keep them all in one sheet.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Found your size? Now count it on the drawing.
Upload your PDF and SteelFlo boxes the steel labels it finds, so you get a member list instead of a manual tally of 25x25x3EA and its neighbors.
Deeper reading: PFC, EA & UA Sizes (Australia) · How to calculate steel weight