60x60x6EA Dimensions & Weight
60x60x6EA is an equal-leg steel angle to AS/NZS 3679.1 with equal 60 mm legs and a 6 mm thickness, weighing 5.42 kg per metre (3.64 lb/ft) — a stock size for clip angles, connection material, and light bracing.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
or start a free takeoff to count 60x60x6EA on your drawing.
Free takeoff template in Excel. Takeoff template in Excel. Free with a Steelflo account.
60x60x6EA Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Leg 1 | 60 mm | 2.362 in |
| Leg 2 | 60 mm | 2.362 in |
| Thicknessnominal — AS/NZS names carry nominal thickness; rolled thickness can differ slightly | 6 mm | 0.236 in |
| Cross-section area (A)computed from weight and steel density | 6.9 cm² | 1.07 in² |
| Mass | 5.42 kg/m | 3.64 lb/ft |
Standard: AS/NZS 3679.1. Values from the published section tables; dimensions not listed here are not shown rather than estimated.
What does 60x60x6EA weigh and cost?
60x60x6EA has a mass of 5.42 kg per metre. At an example material price of 2.00 per kg (in your currency) that is about 10.84 per metre. Set your quantity, length, and price to total your own run:
Material only, example pricing (same currency as the price you enter). Actual steel pricing varies by region, grade, quantity, and market conditions — use your own supplier numbers for real bids.
Pricing more than one size? Build a full member list in the free calculator →
Tallying by hand?
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Stop counting 60x60x6EAs by hand.
Upload your drawing set and SteelFlo puts a box on each steel label it finds, including 60x60x6EA, ready to review and export as a bill of materials.
Related sizes
- 60x60x5EA4.57 kg/m
- 60x60x8EA7.08 kg/m
- 75x75x5EA5.27 kg/m
- 50x50x8EA5.68 kg/m
- 65x65x6EA5.87 kg/m
- 55x55x6EA4.93 kg/m
- 65x65x5EA4.56 kg/m
- 50x50x6EA4.46 kg/m
Comparing sizes? Keep them all in one sheet.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Found your size? Now count it on the drawing.
Upload your PDF and SteelFlo boxes the steel labels it finds, so you get a member list instead of a manual tally of 60x60x6EA and its neighbors.
Deeper reading: PFC, EA & UA Sizes (Australia) · How to calculate steel weight