AS/NZS Unequal Angles (UA): Sizes & Weights

Australian unequal angles to AS/NZS 3679.1. 28 sizes from the AS/NZS catalog, in kg/m with lb/ft alongside. Deeper reading: AS/NZS Steel Sections Guide.

40x25UA series

Designation	kg/m	lb/ft	Area (cm²)
40x25x4UA	1.93	1.3	2.5

45x30UA series

Designation	kg/m	lb/ft	Area (cm²)
45x30x4UA	2.25	1.51	2.9

60x30UA series

Designation	kg/m	lb/ft	Area (cm²)
60x30x5UA	3.36	2.26	4.3

65x50UA series

Designation	kg/m	lb/ft	Area (cm²)
65x50x5UA	4.02	2.7	5.1
65x50x6UA	5.16	3.47	6.6
65x50x8UA	6.59	4.43	8.4

75x50UA series

Designation	kg/m	lb/ft	Area (cm²)
75x50x5UA	4.4	2.96	5.6
75x50x6UA	5.66	3.8	7.2
75x50x8UA	7.23	4.86	9.2

100x75UA series

Designation	kg/m	lb/ft	Area (cm²)
100x75x6UA	7.98	5.36	10.2
100x75x8UA	10.3	6.92	13.1
100x75x10UA	12.4	8.33	15.8

125x75UA series

Designation	kg/m	lb/ft	Area (cm²)
125x75x6UA	9.16	6.16	11.7
125x75x8UA	11.8	7.93	15
125x75x10UA	14.2	9.54	18.1
125x75x12UA	17.7	11.89	22.5

150x90UA series

Designation	kg/m	lb/ft	Area (cm²)
150x90x8UA	14.3	9.61	18.2
150x90x10UA	17.3	11.63	22
150x90x12UA	21.6	14.51	27.5
150x90x16UA	27.9	18.75	35.5

150x100UA series

Designation	kg/m	lb/ft	Area (cm²)
150x100x8UA	15.2	10.21	19.4
150x100x10UA	18	12.1	22.9
150x100x12UA	22.5	15.12	28.7

200x100UA series

Designation	kg/m	lb/ft	Area (cm²)
200x100x10UA	22.5	15.12	28.7
200x100x12UA	26.9	18.08	34.3
200x100x15UA	33.8	22.71	43.1

200x150UA series

Designation	kg/m	lb/ft	Area (cm²)
200x150x12UA	31.4	21.1	40
200x150x16UA	41.3	27.75	52.6

Areas marked as computed on the individual size pages are derived from the tabulated weight and steel density rather than read from the section table.

Need counts, not just sizes?

Upload a drawing set and SteelFlo puts a box on every steel label it finds — every unequal angle on every page — ready to review and export as a bill of materials.

Start a free takeoff All steel shapes

3 free takeoffsNo credit card requiredAISC + 5 international standards