75x50x8UA Dimensions & Weight
75x50x8UA is an unequal-leg steel angle to AS/NZS 3679.1 with 75 mm and 50 mm legs and a 8 mm thickness, weighing 7.23 kg per metre (4.86 lb/ft) — a stock size for clip angles, connection material, and light bracing.
75x50x8UA Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Leg 1 | 75 mm | 2.953 in |
| Leg 2 | 50 mm | 1.969 in |
| Thicknessnominal — AS/NZS names carry nominal thickness; rolled thickness can differ slightly | 8 mm | 0.315 in |
| Cross-section area (A)computed from weight and steel density | 9.2 cm² | 1.43 in² |
| Mass | 7.23 kg/m | 4.86 lb/ft |
Standard: AS/NZS 3679.1. Values from the published section tables; dimensions not listed here are not shown rather than estimated.
What does 75x50x8UA weigh and cost?
75x50x8UA has a mass of 7.23 kg per metre. At an example material price of 2.00 per kg (in your currency) that is about 14.46 per metre. Set your quantity, length, and price to total your own run:
Material only, example pricing (same currency as the price you enter). Actual steel pricing varies by region, grade, quantity, and market conditions — use your own supplier numbers for real bids.
Pricing more than one size? Build a full member list in the free calculator →
Stop counting 75x50x8UAs by hand.
Upload your drawing set and SteelFlo puts a box on every steel label it finds — every 75x50x8UA, on every page — ready to review and export as a bill of materials.
Related sizes
Deeper reading: AS/NZS Steel Sections Guide · How to calculate steel weight