ISA 75x50x10 Dimensions & Weight
ISA 75x50x10 is an unequal-leg steel angle to IS 808 with 75 mm and 50 mm legs and a 10 mm thickness, weighing 9 kg per metre (6.05 lb/ft) — a stock size for clip angles, connection material, and light bracing.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
or start a free takeoff to count ISA 75x50x10 on your drawing.
Free takeoff template in Excel. Takeoff template in Excel. Free with a Steelflo account.
ISA 75x50x10 Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Leg 1 | 75 mm | 2.953 in |
| Leg 2 | 50 mm | 1.969 in |
| Thickness | 10 mm | 0.394 in |
| Cross-section area (A)computed from weight and steel density | 11.5 cm² | 1.78 in² |
| Mass | 9 kg/m | 6.05 lb/ft |
Standard: IS 808. Values from the published section tables; dimensions not listed here are not shown rather than estimated.
What does ISA 75x50x10 weigh and cost?
ISA 75x50x10 has a mass of 9 kg per metre. At an example material price of 2.00 per kg (in your currency) that is about 18.00 per metre. Set your quantity, length, and price to total your own run:
Material only, example pricing (same currency as the price you enter). Actual steel pricing varies by region, grade, quantity, and market conditions — use your own supplier numbers for real bids.
Pricing more than one size? Build a full member list in the free calculator →
Tallying by hand?
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Stop counting ISA 75x50x10s by hand.
Upload your drawing set and SteelFlo puts a box on each steel label it finds, including ISA 75x50x10, ready to review and export as a bill of materials.
Related sizes
- ISA 75x50x54.7 kg/m
- ISA 75x50x65.7 kg/m
- ISA 75x50x87.3 kg/m
- ISA 90x60x89 kg/m
- ISA 75x75x88.9 kg/m
- ISA 100x100x69.2 kg/m
- ISA 60x60x108.6 kg/m
- ISA 65x65x109.4 kg/m
Comparing sizes? Keep them all in one sheet.
Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).
Found your size? Now count it on the drawing.
Upload your PDF and SteelFlo boxes the steel labels it finds, so you get a member list instead of a manual tally of ISA 75x50x10 and its neighbors.
Deeper reading: Steel Angle Sizes Chart · How to calculate steel weight