ST10X33 Dimensions & Weight

ST10X33 is an AISC structural tee with a nominal depth of 10 in, weighing 33 lb per foot — commonly used for truss chords, hangers, and lintels. It is the lightest of the 4 ST10 sizes listed here.

Get the AISC weights table (Excel): ST10X33 and every other size

Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).

or start a free takeoff to count ST10X33 on your drawing.

Weights for every AISC size, in Excel. All AISC sizes in Excel. Free with a Steelflo account.

Get the weights table

ST10X33 Dimensions

Property	Imperial	Metric
Nominal depthfrom the designation	10 in	254 mm
Cross-section area (A)computed from weight and steel density	9.7 in²	62.6 cm²
Weight	33 lb/ft	49.1 kg/m

Standard: AISC. Values from the published section tables; dimensions not listed here are not shown rather than estimated.

What does ST10X33 weigh and cost?

ST10X33 weighs 33 lb per foot. At an example material price of $0.92/lb that is about $30.36 per foot. Set your quantity, length, and price to total your own run:

QtyLength (ft)$ / lb

Count them on my drawing →

Total weight

660 lbs

Material cost

$607.20

Material only, example pricing. Actual steel pricing varies by region, grade, quantity, and market conditions — use your own supplier numbers for real bids.

Pricing more than one size? Build a full member list in the free calculator →

Tallying by hand?

Free steel takeoff template (Excel) with 4,600+ sections across 6 standards built in

Free. Needs a free Steelflo account (also includes 3 free takeoffs, no card).